I had been planning to put up sheer roller shades for a long time, even before I began redoing my bedroom (photos next week). We used to like our room darkening Roman blinds because they let us sleep in deliciously late. We haven’t been able to sleep in since we had our little alarm clock though, and the room began to feel oppressively dark in the wee morning hours.
I knew I had twittered about picking up the shades (ENJE), so I looked for the tweet to see how long ago that was. February 16. Oof.
The shades didn’t come in the exact size that I needed, but Anna reassured me that they are easy to work with. So over the weekend I set about trimming off 2.5″ and installing them, and it was easy.
All you have to do is measure the amount to be trimmed, mark it and then cut. Using good, sharp scissors will help (you do reserve a pair of scissors just for fabric, right?). The metal top and bottom can be cut with a hacksaw or jigsaw with a metal blade, but the fabric needs to be cut away first or it will become ragged. I used an x-acto knife for that part.
After you’ve cut everything down to the proper size, you just pop the ends back on and hang the shade according to the simple directions.
Done!
Benita of Chez Larsson just took on the same project recently, and here Anna of Door Sixteen gives her take on the ENJE shades. I’m so pleased with the way they look, and they were so inexpensive… especially compared to custom roller shades.
Jules
June 10, 2010 at 10:14 amMorgan from The Brick House hack those rollers, too. Tempting. Very, very tempting.
Jules
June 10, 2010 at 10:14 amBlargh. Stupid typos.
Beth
June 10, 2010 at 10:26 amWhy not just head to Home Depot and have them cut for you? Sounds like you took the hard way.
Julie
August 22, 2011 at 3:40 pmBeth does Hope Depot actually do this for you and if they do, is there a charge?
Nicole
June 10, 2010 at 10:27 amawesome!! you made it look so easy!
Amanda elias
June 10, 2010 at 10:48 amThanks for the great tip about cutting rollers down to size! I think your post compliments a recent designsponge post about making custom rollershades with fabric! http://www.designspongeonline.com/2010/06/sewing-101-roller-blinds.html
katie
June 10, 2010 at 11:06 amafter seeing these on the brick house and door sixteen, i also bought them for our dining room and our den. i had to custom cut 2 of the shade, but like you said, it was no big deal. they look great and you cannot beat the price!
Nuit
June 10, 2010 at 11:24 amthey do look great!!!!!
Carrie
June 10, 2010 at 11:25 amI so want roller shades like these! Too bad the nearest Ikea is 6 hours from where I live. :(
Clair
June 10, 2010 at 12:24 pmTres lovely! I like waking up to the sun as well.
Gina
June 10, 2010 at 12:25 pmLovely shades!! :)
kasey
June 10, 2010 at 12:26 pmthey look great.
Amanda
June 10, 2010 at 12:29 pmThis is not about your window covering project…disappointment, i know.
I could swear that i saw your “sister” at my dermatologist’s office this afternoon. Do you have a office manager as a sister in Fort Wayne, In? (if you do, you need to ask her to tell the receptionist to be nicer to new patience. Ha! I digress.)
I read your blog 2-3 times a week and love hearing about your projects and your family. I’m all about DIY and your creativity inspires me.
Amanda
June 10, 2010 at 12:30 pmyuck! look at all of those mispellings! Please don’t tell my HS English teacher.
Making it Lovely
June 10, 2010 at 8:26 pmNope, I don’t have any relatives in Fort Wayne. :)
Dallas Landrum
June 10, 2010 at 12:29 pmI hate waking up with the sun, so I got the darker version :)
vika
June 10, 2010 at 1:25 pmNot sure if you saw or if it applies to you – but there’s a recall on Ikea blinds
http://consumerist.com/2010/06/ikea-recalls-336-million-blinds-over-strangulation-risk.html
Making it Lovely
June 10, 2010 at 8:27 pmThe chain needs to be attached to the wall for child safety. That’s a problem with all window treatments that have loops, not just IKEA’s version.
Amy
June 10, 2010 at 1:50 pmWe have these shades in our living room. My husband taped around the fabric with masking tape (so they wouldn’t get torn up) and cut them down to size with an electric miter saw.
And regarding the strangulation recall, I plan on attaching small silver hooks up near the top of the windows to hook up the pull cord so it isn’t dangling within baby reach.
Making it Lovely
June 10, 2010 at 8:28 pmYou got a nice crisp cut with the tape in place? That’s good to know.
Amy
June 10, 2010 at 9:39 pmIt looks pretty good. My husband isn’t nearly as much of a perfection as I am, so it would have looked much better if I had done it myself. Sadly, I’m afraid to use big power tools! But it looks good! If I wasn’t happy with it, I would have made him take a trip to Ikea for another 3 shades and teach me how to use the saw!
Julie
June 10, 2010 at 3:20 pmDitto Vika’s comment. Bummer!
http://money.cnn.com/2010/06/10/news/companies/IKEA_recall_blinds/index.htm?section=money_topstories&utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+rss%2Fmoney_topstories+%28Top+Stories%29
Making it Lovely
June 10, 2010 at 8:29 pmYes, the chain loop can be a strangulation hazard (it warns you of it in the shade’s packaging too). The loop must be secured to the wall instead of allowed to hang freely.
Licia
June 10, 2010 at 3:37 pmI have these and love them. They give the room such a nice light. Not too bright, not too dark.
Noel
June 10, 2010 at 3:44 pmLove your blog and the shades. I’ll bet a rotary cutter would make short work of the shade trimming.
Erin
June 10, 2010 at 4:27 pmLove it! And I love your drapes hanging in the background too. Did you make them? The print is darling!
Making it Lovely
June 10, 2010 at 8:29 pmYes, I sewed those myself. :)
melissa @ den design studio
June 10, 2010 at 5:43 pmLove the bright white against the dark grey walls. I also love seeing people take on IKEA products. I was a visual merchandiser there for a few years and spent all day creating displays hoping others would see how wonderful and unique the products can look.
Lifebeginsatthirtyright
June 10, 2010 at 5:44 pmYou are so lucky – I guess with the whole “recall” they discontinued them here in Canada. I tried to get them a month or so ago and no-can-do.
Looks great!
Pins + Paper
June 10, 2010 at 6:41 pmI love this tutorial! Thanks for sharing! I have the same problem here at home and now I have a great solution for it :)
~ Kristen
Miss B
June 10, 2010 at 7:09 pmOh I love these I put them up in every apartment I have. I love the diffused light it gives with still providing privacy. Beautiful:)
Aimee
June 10, 2010 at 7:23 pmHi Nicole,
This post has given me hope in my quest for non-standard sized window coverings (which is a nightmare so far).
One question: did you trim both the width and the length with no problems, or just the length?
Thanks,
Aimee
Making it Lovely
June 10, 2010 at 8:30 pmI only trimmed the width, but the length would be easy to adjust as well.
Mrs.Limestone
June 10, 2010 at 8:27 pmThanks so much for sharing this. I need this very thing on every window at the shore but I didn’t want to blow a ton on custom. Now I just need to get a hacksaw and I’m good.
Nataliya
June 11, 2010 at 7:52 amHi Nicole,
just wanted to mention something, this morning on the radio I head that there was an insident of toddler almost strangling on the roller blind cords. Up here in Canada Ikea has issued a recall of all their blinds.
That’s too bad, I was just on my way to pick up some!
N
Making it Lovely
June 11, 2010 at 8:38 amYes, I already addressed this in a couple of earlier comments. The strangulation risk is present in all closed loop blinds and shades (not just those from IKEA). The chain needs to be attached to the wall so that there is no slack for a child to fit their head through.
Nataliya
June 11, 2010 at 10:09 amoh, I know that its an issue with all blinds, I was just not expecting Ikea to do a recall. I completely agree that we as parents, must do our own due diligence. It is actually sad that a nice product is off the market. I now wish I did not procrastinate and got them while they were still available.
Decor Girl
June 11, 2010 at 2:09 pmVery nice job on the shades and great pictures. Ikea is one of my favorite haunts too. Great stuff and easy to change or adapt. Thanks for sharing your fearless ways. Sometimes all it takes is to know someone else did it, then it is okay.
bdog
July 1, 2010 at 8:45 pmHas anyone tried shortening the actual cord? Any ss fastners to re-connect them? We have the shades installed but the cord is too long for the space; e.g. overlaps a counter.
Thanks.
2010 Recap: The Home | Making it Lovely
January 5, 2011 at 9:31 am[…] showed you how to make inexpensive custom-sized roller shades for your […]
Phil
June 27, 2011 at 3:51 amNice job!
I have the opposite pb…
How could we double the size, assembling 2 ENJE roller shade together?
This is just to avoid a double chain loop for a 2x 2,60 m window.
Thanks
My Newly Redone Office | Making it Lovely
August 16, 2011 at 6:18 am[…] IKEA that match the wall color. I also planned to add a sheer roller shade, but my usual go-to (Enje shades) are unavailable right […]
lonestarhotyoga
January 22, 2014 at 11:22 amI am looking to add some shades to my yoga studio front windows. Had seen these blinds and was disappointed to find out they weren’t the exact right size. Happy to see some blogs where people have “hacked” the blinds to make them fit, and well.
I see there a lot of comments about the chain. I also noticed the ikea site specifically says this shade is cord free…so I am assuming this means they USE to come with a metal chain and now they don’t? I plan on heading over there later to check them out again. Thanks for the post!